Copyright ©2018, Infoblox, Inc.All right reserved.
Dark
Link is down
Link
Steady Blue
10000 Mbps (SFP+ only)
Steady Amber
1000 Mbps
Steady Green
1000 Mbps
Dark
10 Mbps
Category 5 Cable: Up to 100 Mbps
Category 5e/6 Cable: Up to 1Gbps
SFP/SFP+ Interface Support
All models in the Infoblox 4005 Series support optional interfaces to accept SFP transceiver modules, for 1GbE optical connectivity. The
table
summarizes SFP and SFP+ support for appliance models in the Infoblox 4005 Series.
below
Note: You cannot add SFP/SFP+ support after you have purchased an appliance model that does not have the SFP/SFP+ interfaces
pre-installed. Contact your Infoblox representatives if you are interested in purchasing appliances that support SFP/SFP+ interfaces.
To support connectivity to 10 Gigabit (10GbE) networking infrastructure, Infoblox also offers versions of the Infoblox IB-4015 and IB-4025,
Network Insight ND-4005 and Trinzic Reporting TR-4005 that provide 10-Gigabit Ethernet (10GbE) interfaces accepting SFP+ transceiver
modules, for 10GbE RJ-45 copper or optical connectivity.
The Infoblox IB-4015 and IB-4025 appliances support four active 10GbE interfaces in the optional 1GbE SFP and 10GbE SFP+ configurations.
Other appliances in the Infoblox 4005 Series, comprising the ND-4005 and TR-4005, support three active interfaces in the optional 1GbE SFP
and 10GbE SFP+ configurations. The port designated HA for these three models is inactive for these appliances. Order of ports from left to right
is otherwise the same.
In optional configurations for the Infoblox 4005 Series (any appliance that does not use the internal Ethernet ports), the Infoblox 1GbE SFP or
10GbE SFP+ ports replace the functionality in the original system MGMT, LAN1, HA and LAN2 ports, thereby disabling the built-in MGMT, LAN1,
HA and LAN2 ports. 10GbE support accepts Infoblox-provided SFP+ 10GbE Short Range and Long Range transceivers, Cisco SFP+ Direct
Attach Cu, or HP HPJ9283B SFP+ Direct Attach Cu transceivers.
You may mix media types in the set of ports (e.g., one copper SFP in the MGMT port and two or three fiber SFPs).
SFP and SFP+ transceivers also may be used in a mixed configuration in a 4-Port 10GbE system. One example involves installing 10GbE SR
SFP+ transceivers in the LAN1 and LAN2 ports for the Infoblox IB-4015 and IB-4025 appliance, and installing 1GbE SFP copper transceivers in
the MGMT and HA interfaces.
Note: For ND-4005 and TR-4005 models configured with 1GbE SFP or 10GbE SFP+ interfaces, the HA port is reserved for future use and cannot
be used for network applications. Order of ports from left to right is otherwise the same.
SFP/SFP+ Interfaces Support Summary
Infoblox 4005
Series Model
SFP/SFP+ Support
# of active
SFP/SFP+ ports
10GbE Support
Accelerated 10GbE
Support
HA
Disabled internal
RJ-45 ports
IB-4015
Y
1
4
Y
N
Y
Y
2
IB-4025
Y
1
4
Y
N
Y
Y
2
ND-4005
Y
1
3
Y
N
N
Y
2
TR-4005
Y
1
3
Y
N
N
Y
1
– With optional 1GbE or 10GbE line card. Disables internal RJ-45 ports.
2
– Only in appliance configurations with optional SFP/SFP+ ports.
See the section
for specific information on part numbers, availability, and device compatibility.
Field Replaceable Units
Interface Connector Pin Assignments
An Infoblox 4005 Series appliance has three types of ports on its front panel:
USB port (reserved for future use)
Male DB-9 console port
RJ-45 10Base-T/100Base-T/1000Base-T auto-sensing gigabit Ethernet ports
