Copyright ©2018, Infoblox, Inc.All right reserved.
Optional 10GbE or 1GBE SFP+/SFP system configurations for fiber or copper support.
Management through the Infoblox Grid.
LOM (Lights Out Management) support.
Replaceable hard disk drives and fan modules.
Hot-swappable AC or DC power supplies in a redundant 1+1 configuration.
Note: The Trinzic Reporting TR-4005 does not support HA operation and acts only as a Grid member.
Infoblox 4005 Series Hardware Components
The Infoblox 4005 Series are 2-U appliances that you can efficiently mount in a standard equipment rack. For information about rack mounting,
see
.
Rack Mounting Procedures
Front Panel
Infoblox 4005 Series front panel components include communication ports and hard disk drives, as shown in the
and described in the
figure
table
below. The hard disk drives are concealed under a removable drive bay door. You must remove the door to access the hard disk drives, as shown
in the
. For more information, see
and
.
figure
Ethernet port LEDs
Interface Connector Pin Assignments
Table
below describes the Infoblox 4005 Series front panel components.
Front Panel Components
Component
Description
Hard Disk Drives
Four hot-swappable Infoblox data storage devices configured in a RAID 10 (Redundant Array of Independent Disks)
array. Each disk drive has LEDs on the far left side of each drive carrier,that indicate the connection and activity
status on the disk drive. The top LED flickers green when the disk drive is operational and performing read-write
operations. The lower LED is dark(inactive) during all operations. Both drive LEDs are dark when the disk drive is not
connected.You must use the Grid Manager UI or the NIOS CLI to verify disk operation. For more information, see
Ev
.
aluating the Status of the Disk Subsystem
