24
25
19. PHOTOGRAPHY AND VIDEO
RECORDING
The BOLT TD50L is equipped with video recording and image
capture.
Photo and video files are named with the time and date; therefore,
it is recommended to set the date and time before using the photo
and video functions. See
on page 39. Alternately, the date and time may be
synchronized with one button in the InfiRay Outdoor App. See
NOTE: All recorded videos and photos are automatically saved to
the built-in 16 GB memory storage.
Photography
To take a photo:
1. From the home
screen, short press
the
Photo
Button
.
2. The image will freeze
for 0.5 seconds and
the camera icon
will appear briefly in
the upper-left corner
of screen.
Video Recording
To record video:
1. From the home
screen, long press
the
Photo
Button
to start a video
recording.
2. When the video
recording starts,
the video recording
timer, in HH:MM:SS
(hour: minute:
second) format,
appears in the upper-right corner of the screen.
3. When recording, short press the
Photo
Button
to take a
photo.
4. Long press the
Photo
Button
to stop and save the video
recording.
Video and Photography Tips
• You may enter and navigate the menu as normal during video
recording. The user interface (the status bar, icons, and menu) is
not captured in recorded video or photo files.
• Recorded photos are saved to the internal memory card in .jpg
format, videos are saved in .mp4 format.
a. Photos are saved in IMG_HHMMSS_XXX.jpg format.
b. Videos are saved in VID_HHMMSS_XXX.mp4 format.
c. HHMMSS is hour/minute/second.
d. XXX is a 3-digit counter number.
• The counter number used for the names of multimedia files
cannot be reset.
• If a file is deleted from the list, its counter number is not taken by
another file.
CAUTION:
• The maximum duration of a recorded video file is 10 minutes.
After this time, video recording will automatically begin a
new file.
• The number of the recorded files is limited only by the capacity
of the internal memory.
• Check the available space of the internal storage card regularly
and move the footage to other storage media to free up the
memory card space.
• The reticle is captured in recorded video and photo files, but
graphic data (the status bar, icons, and menu) are not.
20. ACCESSING THE INTERNAL
MEMORY
When the BOLT TD50L is turned on and connected to a computer
via the included data cable, it is recognized by the computer as a
flash memory (USB) drive. This allows the user to access the saved
multimedia files and copy or delete any desired files.
To access the internal memory:
1. Turn on the BOLT TD50L and remove the USB port cover
(8)
.
2. Connect the smaller USB-C end of the data cable to the USB-C
port
(9)
.
3. Connect the standard USB end of the data cable in to the USB
port on your computer.
4. Double-click
My Computer
on the desktop of your computer.
5. Double-click to open the USB drive named
BOLT
.
