Infinity 480 FL, Руководство пользователя

Страница: 13 / 32

13 LT 6117 (12/13 Iss 11)
480 FL Users Instructions
SECTION FIVE General Points
Like all appliances incorporating an aerated burner a low frequency
noise may be heard, particularly on the low setting, this is quite
normal and does not affect the operation of the appliance.
It is advised that a competent person service the 480 FL fire
annually. The fire is more likely to provide trouble-free operation.
Dulling and slight discoloration inside the firebox will occur adding to
the realism of the appliance. This is normal.
It is important that: -
The chimney or flue is checked annually to ensure clearance of
combustion products. This can be inspected by removing the inner
firebox and removal of the inspection covers located on the back
and top of the outer firebox. This can be obtained by doing the
following.

Remove the two side covers LH and RH which are held with
magnets.

Undo the two M4 nuts retaining the glass fixing bracket using
the tool provided then pull clear and remove from location
studs.

Carefully lift the glass panel from within the bottom retaining
slot.

Remove the log fuel bed shapes.

Lift out the air tray assembly from the location points within
the shelf.

Pull out the air grill and disconnect the battery holder from
the lead and remove.

Remove the two screw retaining the gas connection cover
from within the burner shelf and remove cover. Shut down
restrictor elbow and disconnect the 8mm inlet nut.

Undo the three fixing screws from the burner tray and lift out
burner tray assembly taking care not to damage the liners.

Remove the six M4 nuts from the front face of the inner
firebox.

Taking care not to damage the top liner remove the three
fixing screw from the top of the inner firebox.

Carefully pull the inner firebox forward to clear the outer
firebox assembly.

Remove the inspection plates located within the outer firebox
taking care not to damage the sealing gaskets.

After inspection for clearance is completed reassemble in
reverse order.
The only user removable parts are: -

Refractory Fire bed Components

Side covers and air grill.

Glass panel top fixing bracket.

Glass panel.