Be Modern Elgin & Hall Installation Instructions And User Manual Download

Page: 1 / 8

Micro Marble Fireplaces

INSTALLATION INSTRUCTIONS AND USER GUIDE

E IN BRITA

E IN BRIT

Important Information

Before you begin the installation, please ensure that a full and detailed inspection of all component parts is

undertaken jointly by the installer and purchaser to ensure there is no damage or manufacturing defects with the

product. Once the fireplace has been installed, no claims or responsibility will be accepted by the manufacturer

relating to chips, scratches or any other obvious defects.

Please also ensure you carefully read and fully understand these instructions before commencing installation as

we cannot accept responsibility for any damage or defects caused by non-compliance with these instructions.

These instructions are written in accordance with the ‘Stone Federation Great Britain’ guidance on fire surround

standard building practice, Building Regulations (Approved Document J) and all relevant British Standards.

This fireplace should be installed only by competent professional fireplace installers and fitted only to suitable

surfaces. You should check with your installer that the constructional elements of the intended chimney breast

and flue comply with current Building Regulations, and that they are suitable for the appliance that is to be

installed.

NOTE: Installation is not recommended as a DIY or single person task. In addition to this giving rise to the

potentially increased risk of product damage and/or incorrect installation, it should also be noted that some

marble components can be very heavy and will require two people to lift/handle. Caution should always be

exercised if attempting to lift heavy or awkward objects.

Following the installation, please leave these instructions with the householder.

Summary of Contents for Elgin & Hall








