background image

 INSTALLATION INSTRUCTIONS AND OWNERS

MANUAL

GRATE FIRES VENTED ASSEMBLAGE

Models

For new construction

         

      For masonry fireplace

GE101G30B30N

         

       GE102G30B30N

GE101G30B30P

         

       GE102G30B30P

GE101G36FB30N

         

       GE102G36FB30N

GE101G36FB30P

         

       GE102G36FB30P

PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING AND OPERATING
THE APPLIANCE.

Installer: Leave this manual with the appliance.
Consumer: Retain this manual for future reference

WARNING: 

If the information in this manual is not followed exactly, a fire or explosion may

result causing property damage, personal injury or loss of life.

 - Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or
any other appliances.

WHAT TO DO IF YOU SMELL GAS:

* Do not try to light any appliance.
* Do not touch any electrical switch; do not use any phone in your building.
* Immediately call your gas supplier from a neighbors phone. Follow the gas suppliers     
instructions.
* If you cannot reach your gas supplier; call the fire department.

- Installation and service must be performed by a qualified installer, service agency or the gas
supplier.

WARNING:

 This appliance is equipped for either Natural or Propane Gas. Field conversion is

not permitted. This appliance can be returned for conversion.

Grate Fires

P.O. Box 400 * Washington, Georgia 30673 * (PH) 800-453-6774 (FAX) 706-678-5470

 

email [email protected]

 

         Web site: www.gratefires.com

Summary of Contents for GE101G30B30N






















Reviews: