Infinity 480 FL, Руководство пользователя

Страница: 6 / 32

6 LT 6117 (12/13 Iss 11)
480 FL Users Instructions
SECTION TWO Operating the Appliance Continued
below the SET room temperature, the system will move from standby to the high flame level. From
this point it will proceed again the modulation process.
Note: Due to the temperature checks at timed intervals, the display temperature on the handset may exceed
the room setting temperature before the appliance defaults to
the pilot setting
.
TO REPLACE BATTERY IN HAND SET (3 AAA
TYPE BATTERIES)
Remove the cover from the rear of the handset and fit
replacement battery.
Clock Regulation
As soon as the batteries are fitted the timer digits will
blink. Using the arrow key increase or decrease the
hour, minutes and week`s value. Pressing the
O
will set and shift setting until
complete.
Note: This time setting is for guidance only and does not have a guaranteed accuracy level.
Changing Clock Setting During Operation
To amend clock setting press both the and
O
keys simultaneously for three seconds, the written
clock will appear. To change the clock settings, repeat the above described operation.
Change From Celsius to Fahrenheit
With remote OFF, keeping pressed key at least for 5 seconds, the temperature unit changes
from Celsius to Fahrenheit degrees and vice versa.
Battery level indication (Handset)
When the batteries have to be changed in the handset, the related icon will appear.
Setting the sleep mode
To activate the sleep mode: With the fire switched on press the
O
button. The sleep symbol
will appear top right . The sleep symbol replaces the time indicator in this mode. Using the
arrow key increase the sleep mode in 15 minute intervals (a small star will be visible next to the sleep
symbol once any time is set) .Once the set time is reached, the fire will completely switch off
without any further intervention.
When the fire is next operated, the sleep mode will automatically appear unless it is re-set to zero.
This can be done by pressing the
O
key and using the button to decrease the time set by 15
minute intervals until back to zero.
If you experience unexplained outing on the fire please check that the sleep mode is switched off.