Infinity 480 FL, Руководство пользователя

Страница: 8 / 32

8 LT 6117 (12/13 Iss 11)
480 FL Users Instructions
SECTION THREE Cleaning
Warning: -
Before you clean any part of the appliance ensure that the
appliance is turned off and cold.
CLEANING: PILOT ASSEMBLY
(Before cleaning ensure that the appliance is turned off and
cold)
In some instances you may experience ignition problems even
when the appliance is new. This may be due to the aeration hole
in the pilot body being partial blocked with dust, pet hairs, or
other foreign matter. The source of this debris could be such
things as carpet fibres, decorating or pet etc.
To gain access to the pilot please do the following.

Remove the two side covers LH and RH.

Undo the two M4 nuts retaining the glass fixing bracket
using the tool provided then pull clear and from the
location studs.

Carefully lift the glass panel from within the bottom
location slot.

Remove the log fuel bed shapes and bark shapes.

Lift out the air tray assembly from the location points
within the shelf.
The pilot is located on the right hand side of the appliance, any
debris in or around the aeration hole should be remove using the
nozzle of a vacuum cleaner. It is advisable not to blow the debris
into the hole as this may cause more of a restriction and not
rectify the problem.
Note: - Take care when cleaning in this area so as not to
damage the pilot assembly.
GLASS CLEANING
From time to time it will be necessary to clean the glass panel of your 780 FL. We recommend you
use a Ceramic hob cleaner these are available for all leading super markets: - i.e.
ASDA, TESCO,
SAINSBURY’S
Etc.
Brands of hob cleaning we have tested and found suitable are - HOB BRITE & VITRO CLEAN.

Ensure the fire as been turned OFF for at least four hours to ensure it is cool.

Remove the glass panel as described below.

Lay the glass panel down on a flat working surface on top of an old opened newspaper with the
side to be cleaned uppermost.

Follow the instructions on the Hob Cleaner Bottle.

On stubborn stains (where the appliance as been used for a long period without glass panel being
cleaned), use a new Brillo Pad well wetted with the Hob cleaner applied directly to it.

Ensure all the residues of the cleaner are removed with a damp cloth and the glass panel is
completely dry before fitting to the appliance.
Important:- The appliance must not be used if the glass panel is missing or damaged.
Note: - The glass may discolour quickly when first installed, and it should be cleaned. This is
due to the burning off process of the refractory fuel bed shapes.