5 of 43
2020-5-22
UG2020-11 REF-Vacuum-C101-2ED User Guide
1
Safety precautions
Please note the following warnings regarding the hazards associated with development systems.
Table 1
Safety precautions
Caution:
Only personnel familiar with the drive, power electronics and associated
machinery should plan, install, commission and subsequently service the system. Failure to
comply may result in personal injury and/or equipment damage.
Caution:
The heat sink and device surfaces of the evaluation or reference board may
become hot during testing. Hence, necessary precautions are required while handling the
board. Failure to comply may cause injury.
Caution:
REF-Vacuum-C101-2ED reference board contains parts and assemblies sensitive to
Electrostatic Discharge (ESD). Electrostatic control precautions are required when installing,
testing, servicing or repairing the assembly. Component damage may result if ESD control
procedures are not followed. If you are not familiar with electrostatic control procedures, refer
to the applicable ESD protection handbooks and guidelines.
Caution:
A drive that is incorrectly applied or installed can lead to component damage or
reduction in product lifetime. Wiring or application errors such as undersizing the motor,
supplying an incorrect or inadequate DC supply, or excessive ambient temperatures may
result in system malfunction.
Caution:
REF-Vacuum-C101-2ED reference board is shipped with packing materials that need
to be removed prior to installation. Failure to remove all packing materials that are
unnecessary for system installation may result in overheating or abnormal operating
conditions.
