Inficon Transpector SPS, Руководство по эксплуатации

Страница: 147 / 174

10 – 6
Transpector SPS Operating Manual
1d
Once the turbo pump reaches normal speed, a pumpdown delay occurs
before data can be collected. The default pumpdown delay is 300 seconds
(five minutes).
2
Bake out the Transpector SPS.
2a
Click Start Timed Bakeout.
2b
Select a bakeout time. A normal bakeout is eight hours.
3
Click Configure to change Transpector SPS Hardware Configuration settings
if desired.
4
Click Emission . The sensor filament is off the first time Configuration Monitor
is run. The Emission button will be dark blue. It will progress to yellow and
finally green to signify that the EM is on. (See Figure 10-8 .)
Figure 10-8 Emission status
5
Click Multiplier to turn on the electron multiplier. The Multiplier button will be
colored dark blue. It will progress to yellow and finally green to signify that the
EM is on. (See
Figure 10-9 .)
Figure 10-9 Multiplier status
6
Click Edit to alter the sensor’s data acquisition parameters (see Figure 10-11
on page 10-7 ). For more information on data acquisition parameters, refer to
the FabGuard Explorer Operating Manual .
NOTE: Maintain a detailed log of the changes to the sensor’s data acquisition
parameters.