iNetVu™ 5000 Controller User Manual
Page 20 of 77
9.1. Stand-alone
Receiver
IMS service must be set to ‘iReceiver’.
9.2.
Existing Modem Integration
IMS service must be set to that of the existing service/modem.
(For example, if you are using an iDirect modem, the IMS service must be set to ‘iDirect’)
9.3.
Setting Target Satellite
Using the Maintenance screen (either in Windows Interface or Web Interface), the user
can set the Satellite Name, Longitude and the Receive/Transmit Polarity.
Note: Sat Pol Offset;
Vertical Rx = 90; Horizontal Rx = 0 (For CONFIG Mode and Web
Interface only)
Fig. 7:
Satellite Parameters for USER and CONFIG Mode
Fig. 8:
Satellite Parameters for Web Interface
