C-Com Satellite Systems Inc
Page 45 of 77
iNetVu™ 5000 Controller User Manual
Revision 1.0.2
Satellite Modem / DVB Tuner Communication Status
Indicates the Transmitter status and displays any issues in communication with the
Satellite Modem / DVB Tuner
•
Checking Modem
Verifying Satellite Modem’s current status
•
Transmitter Enabled
Indicates that the transmitter has been enabled.
•
Transmitter Disabled
Indicates that the transmitter has not been enabled.
•
Transmitter Standby
Transmitter becomes idle during the ACP Test.
•
Modem Failed
A communication failure with the Satellite Modem has been detected.
•
Tuner Normal
Communication with the DVB Tuner has been detected and is active.
•
Tuner Failed
A communication failure with the DVB Tuner has been detected.
GPS Status
Displays condition of the GPS signal
•
GPS Normal
GPS signal is being received from the GPS Antenna.
•
GPS Failed
GPS signal is not being received from the GPS Antenna.
•
GPS Searching
iNetVu™ Mobile Software attempts to detect a GPS signal from the GPS
Antenna for 2 minutes.
•
GPS Override
GPS coordinates have been manually overridden from the Maintenance menu.
Controller Status
Displays communication status between the PC and the iNetVu™ Controller
•
Controller Normal
Indicates normal communication status between the Controller and the PC
•
Controller Failed
A failure in communication between the Controller and the PC has been detected.
Motor Status
Displays the movement of the 3-axis motors: Elevation, Azimuth, and Polarization
•
EL Moving UP / DN
Elevation Motor is moving in the respective direction
(UP = Up, DN = Down)
•
AZ Moving Left / Right
Azimuth Motor is moving in the respective direction
•
PL Moving CCW / CW
Polarization Motor is moving in the respective direction
(CCW = Counter Clock-Wise, CW = Clock-Wise)
•
Motor Unknown
Motor Status cannot be detected.
