iNetVu™ 5000 Controller User Manual
Page 21 of 77
9.4.
Disabling DVB Receiver
Should the user decide not to use the DVB Receiver for satellite acquisition, and prefers
to use the standard integration method using the RF Detector, please follow the steps
below.
1. Advance to the “iNetVu Configuration” screen, and select the “Start in Config
Mode” check box, as outlined in the figure below.
Fig. 9:
IMS 6.2.1 – IMS Configuration Screen
2. Click the “Save” button. If you are prompted to write to EPROM, click “Yes”
and restart IMS.
