Inepro MicroTimer 2400, Техническое руководство

Страница: 17 / 28

11
Function Overview
Function FA, Standard or external start mode
Function Star t M ode T ype
Setting Descr iption Default
00
The M icoTimer can be started by pushing the Timer button or by generating
a puls, w hich is longer as 200 msec, on the external connection (remote
button print).
1
01
The M icoTimer can be started by generating a pulse betw een the 20 and 200
msec. This setting is dedicated for mechanical coin mechanisms.
N ote:
In case the coin mechanism input is selected (setting “01”) then starting the
timer w ith the Timer button is not possible.
When the timer button is selected (setting “00”), then by generating a signal
on the coin mechanism input, the pre-time can be bridged to start the main-
time. (This can be done by short circuiting the coin mechanism connection
pins)
Function FB, Running time counter (reset possible)
( ECOS module EM-10)
Function Running time counter ( r eset possible)
Setting Descr iption Default
0-6
The running time counter is an electronic counter, w hich registers
cumulativ ely the number of minutes the main channel, relay 1, has been
operativ e. The main channel relay 1 is only activ e during the main time of
the M icoTimer®. It is possible to scroll the counters by pressing the up key .
The 6-digit counter is read back to front, as follow s;
C ounter index E xample V alue
1 1
2 3
3 7
4 5
5 0
6 0
In this example the total running time amounts to 005731 minutes
# V alue
1 0
2 0
3 0
4 0
5 0
6 0
N ote:
Resetting the counters
A fter reading the counters, these can be reset. The reset-procedure is as follow s;
1)
A fter hav ing read the count (6X) press the up and the dow n key s simultaneously
a) (2 hy phens) w ill appear on the display
2) To reset the counter press the up key ,
a) w ill appear on the display
3) N ow press the up and the dow n key s simultaneously
a)
The counters are reset and the M icoTimer® w ill automatically resume its function.
N ote: if necessary , y ou can also read out the indication on the counter w ithout resetting it during
the stand-by period, to do so, press the dow n key during 3 seconds. The indication of the
counters of
F unction F B w ill be represented automatically , but cannot be reset.
Function FC, Coin counter (reset possible)
( ECOS module EM-10)
Function C oin counter ( r eset possible) T his counter r epr oduces the number of coins.
Setting Descr iption Default
0-6 Reading procedure as in function F B .
0
N ote:
C ounter can be reset, procedure like in function F B .
Function FD, Running time counter (reset impossible)
( ECOS module EM-12)
Function Running time counter ( r eset impossible)
Setting Descr iption Default
0-6 Reading procedure as in function F B .
0
N ote:
C ounter can't be reset, procedure like in function F B .
11
11
11
11
11