Inepro MicroTimer 2400, Техническое руководство

Страница: 16 / 28

10 - MicroTimer 2400
Settings
Function F6, Service indicator 1
( ECOS module EM-06)
Function
T he maximum amount of pr ogr ammable r unning hour s befor e a r evision ser vice
is r equir ed. T his r egister will count down per 1 0 0 0 minutes of r elay 1 activity.
T he value of this r egister r epr esents the number x 1 0 0 0 minutes, e.g. 5 =
5 0 0 0 minutes.
When the counter r eaches zer o, the message will appear on the display.
T his is the standar d message to indicate that a r evision “ser vice” is r equir ed.
V alue Descr iption Default
1-254
N umber of serv ice minutes before serv ice on dev ice is required.
When this counter has counted dow n to zero (serv ice counter = 0) the
M icoTimer® w ill display . N umber of minutes = S etting x 1000
minutes.
0
255 D isabled
N ote:
The timer w ill keep running as usual. To reset, simply set the v alue to a
v alue higher then '0'.
Function F7, Service indicator 2
( ECOS module EM-07)
Function
T he maximum amount of pr ogr ammable r unning hour s befor e a r evision ser vice
is r equir ed. T his r egister will count down per 1 0 0 0 minutes of r elay 1 activity.
T he value of this r egister r epr esents the number x 1 0 0 0 minutes, e.g. 5 =
5 0 0 0 minutes.
When the counter r eaches zer o, the message will appear on the display.
T his is the standar d message to indicate that a r evision “ser vice” is r equir ed.
V alue Descr iption Default
1-254
N umber of serv ice minutes before serv ice on dev ice is required.
When this counter has counted dow n to zero (serv ice counter = 0) the
M icoTimer® w ill display and is inhibited until the counter is reset.
N umber of minutes = S etting x 1000 minutes.
0
255 D isabled
N ote:
To reset, simply set the v alue to a v alue higher then '0'.
Function F8, Buzzer setting
( ECOS module EM-08)
Function Buzzer Setting
Setting Descr iption Default
N ote:
This setting is not applicable in this dev ice. 0
Function F9, Clean Function
( ECOS module EM-09)
Function
By means of this function it is possible to for ce the cleaning of a connected
device. A fter the posted time the M icoT imer ® does not accept any fur ther coin
anymor e. T his blockage can be r aised by pr essing the inter nal or exter nal up
key for 3 seconds. T o indicate the necessity of cleaning will appear
inter mittently on the M icoT imer ® display.
Setting Descr iption Default
00 C lean function off
1
01 C lean function on.