Indian Motorcycle Chief 2010 Скачать руководство пользователя | Manualshive

Страница: 50 / 90

background image

Placing Motorcycle in Storage

Before placing your motorcycle in storage – especially
over several months, such as during the winter – careful
planning will help ensure the long life and durability of
your vehicle.

WARNING!

Fuel is extremely fl ammable. Do not store a motorcycle
with gasoline in the tank within the home or in a garage
near open fl ame, pilot lights, sparks or electric motors.
Failure to follow this recommendation may lead to an
explosion or fi re resulting in personal injury and damage
to the motorcycle.

Storage - Continued

Th

e steps to preparing your motorcycle for storage are:

1. Warm the motorcycle to normal operating

temperature. Th

en, change the oil and the oil ﬁ lter,

and start the engine to circulate the new oil.

2. Fill the fuel tank and add a gasoline stabilizer. (For

recommended gasoline stabilizers, consult your
Indian Motorcycle Company dealer). Run the engine
until the gasoline stabilizer has had the chance to
reach the fuel injectors. Turn the engine oﬀ .

3. Check the tire pressure. Ensure the tires are inﬂ ated

to the proper operating pressure. (See TIRE

INFORMATION in the FEATURES & SAFETY
section). If your motorcycle is not stored in an
elevated position, move it regularly to ensure the tires
do not develop ﬂ at spots.

4. Wash and wax the motorcycle (See CARE AND

CLEANING).

5. Remove battery from motorcycle, if necessary, and

charge it

(See Battery).

Store battery above freezing

temperatures, trickle charge once a month.

Note:

Th

e battery will begin to discharge after 21 days

of non- use if it is not disconnected or charged with battery
charger.

WARNING!

Batteries produce hydrogen gas, which is both fl ammable
and explosive. Keep fl ames or sparks away from
batteries at all times. A spark could cause an explosion
resulting in possible personal injury and damage to the
motorcycle.

Maintenance and Lubrication

50

«
...
48
49
50
51
52
...
»

Содержание Chief 2010



























































































Отзывы:

Нет отзывов

Похожие инструкции для Chief 2010

Бренд: Cannondale Страницы: 61

Бренд: MadStad Engineering Страницы: 2

Бренд: MadStad Engineering Страницы: 8

Бренд: Jialing Honda Страницы: 10

Бренд: BMW Motorrad Страницы: 261

Бренд: Zero Страницы: 162

V 7 CAFE CLASSIC

Бренд: MOTO GUZZI Страницы: 147

Бренд: rizoma Страницы: 16

Бренд: Yamaha Страницы: 112

Бренд: Yamaha Страницы: 90

Бренд: Yamaha Страницы: 509

Бренд: Yamaha Страницы: 508

Бренд: Yamaha Страницы: 510

Бренд: Yamaha Страницы: 578

Бренд: Yamaha Страницы: 610

Бренд: Yamaha Страницы: 610

TT-R125(W) 2006

Бренд: Yamaha Страницы: 616

Бренд: Yamaha Страницы: 86

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды