manualshive.com logo in svg

Indian Motorcycle Chief 2010, Руководство пользователя

Поделиться
Скачать
Indian Motorcycle Chief 2010 Скачать руководство пользователя страница 32

Regular Service Intervals 

Regular service will help keep your new Indian® 
motorcycle operating at its optimum condition. Your 
authorized Indian Motorcycle dealer is best equipped 
to service your motorcycle with factory-approved 
methods and replacement parts. 

Ø VOID 
Regular maintenance is required to keep your new 
motorcycle warranty valid. The use of other than 
Indian Motorcycle Corporation approved parts and 
service methods may void the INDIAN WARRANTIES. 
Furthermore, any alterations to the emission system 
components, such as the exhaust system, will void 
your INDIAN WARRANTIES and/or may be in violation 
of Federal and State laws. 

 CAUTION! 

Th

  e regular maintenance schedule provided in this 

manual is intended only as a guideline. If you operate 
your motorcycle under severe or adverse conditions – 
in extreme cold or heat, over very bad roads, through 
standing water or thick dust, at high altitude, etc. – 
you should perform the regular maintenance on your 
motorcycle more frequently to ensure continued safe 
operation. 

Engine Lubrication 

Indian® brand 20w-50SG engine oils are specifi cally 
approved for their suitability in our engines. Th

 erefore, 

use only engine oils recommended by the Indian 
Motorcycle Corporation. If you need to add oil in an 
emergency and recommended oil is not readily available, 
use only a high-quality, 20w-50SG motorcycle oil. 
At the fi rst opportunity, see your authorized Indian 
Motorcycle  dealer to change back to the recommended 
oil. 

 CAUTION! 

Use of inferior brands or non-detergent oils can cause 
engine damage. 

Ø VOID 
Failure to follow recommendations for engine oils could 
result in engine damage not covered by the Indian 
Motorcycle Company Limited Warranty.

Engine Oil Additives 

 CAUTION! 

Do not blend oil additives with engine oil as they may 
be harmful to the engine. Damage or malfunctions 

Maintenance and Lubrication

32

Содержание Chief 2010



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды