Indian Motorcycle Chief 2010, Руководство пользователя

Страница: 14 / 90

Throttle
Control
Grip
Th e throttle
control grip
is located
on the right
handlebar
(See
fi gure 4) . To
open the throttle, roll the top of the control grip towards
you. To close the throttle, roll the control grip away
from you. Th
e control grip is spring loaded so that when
you remove
your hand, the
throttle returns
to the idle
position.
Th
e clutch
lever is located
on the left
handlebar
(See
fi gure 3) . With
your left hand,
pull the lever towards the handlebar grip to disengage
the clutch. To engage the clutch, release the lever slowly
until it reaches its full resting position.
Th e left hand control is equipped with adjustable clutch
lever. Th is will allow the rider to adjust the lever to his/
her preference by changing the dial settings. Setting # 1=
largest reach. Setting #4= smallest reach.
To change settings, gently push lever away from hand
grip and use thumb to rotate. Rotate dial to desired
setting and release lever. Th
e # will align with the arrow
on the lever. (See fi gure 2) .
WARNING! Positioning your fi ngers between the
clutch hand lever and handlebar grip could hamper the
operation of the clutch. This may cause loss of control
of the motorcycle, resulting in possible personal injury
and damage to the motorcycle.
Horn Switch
Th e horn switch
is located on the
left handlebar
controls. Th
e
horn is operated
by pressing
the switch
(See
fi gure 3) .
High-Low Beam Switch
Th e high-low beam switch is located on the left
handlebar controls. By pressing the switch, you select
either high or low beam strength for the headlamp
(See
fi gure 3) .
Features and Safety
Figure 3: Left Hand Control
Figure 2: Lever Adjustment
Figure 4: Right Hand Control
14