26 - GB
OVERWRITE: Memory overwrite mode selection
Select whether the recording should stop when the memory card is full or
whether the recording should continue by overwriting the oldest recordings.
Setting
Description
Yes
select memory overwrite
No
do not select memory overwrite
FRAME RATE: Frame rate selection
Select the recording frame rate (30 /15 / 5 Frames per second). The higher the
frame rate the more memory will be used for a certain time period.
Note: 30fps corresponds to 25fps in the PAL system.
MOTION DETECTION: Selection of detection area and
sensitivity
In the motion detection mode a recording will be automatically started when a
change in the picture is detected.
Detection area
In order to minimise unwanted recording, areas in the picture can be masked -
in these areas the motion will not be detected.
!
Select the area using the
¶
,
·
,
º
and
»
buttons
!
Confirm the area to be activated or deactivated by pressing the OK button
[16]. Masked areas are blue, active areas show the camera image.
!
After setting the area press the menu button [14] to return to the menu
Sensitivity
Select the sensitivity of the recorder reaction to motion
H - high sensitivity
M - middle sensitivity
L
- low sensitivity
ALARM PERIOD: Select warning sound
In the motion detection mode a detected motion can trigger a warning sound:
Setting
Description
Always OFF
no warning sound
10 sec.
10 second warning sound
20 sec.
20 second warning sound
30 sec.
30 second warning sound
LANGUAGE: select menu language
Select between english, german and french
TIME: Set current date and time
Format:
2011/11/15
12:54
Year/month/day
hour:minute
!
Press
¶
or
·
button to move cursor
!
Press
º
or
»
button to change the value
FORMAT: Format the SD card (recorded data will be deleted)
The inserted SD memory card can be formatted before the first usage. Memory
files can be deleted.
Note: Make sure that the SD card is unlocked
Before the first usage each SD card must be formatted
CARD INFO: Information about the memory capacity of the SD
card
Shows the total memory capacity (Total Size), the percentage of the total
capacity which is used (Usage size) and the percentage unused (Remain size).
In the overwrite mode the unused percentage will remain at 2 - 3 %.
10.3 Recording mode
!
The video and, if required the audio signal, from the selected camera can
be recorded
!
The video sequences are recorded on the inserted SD card
!
The video sequences are receorded in ASF format in a resolution of 640 x
480 pixels
!
The number of recorded frames per second can be selected (5,15 or 30 fps,
see Chapter 10.2 Frame rate)
!
A ring memory system can be selected, so that when the SD card memory is
full the oldest files will be overwritten (see Chapter 10.2 Overwrite)
