The video recorder is powered by the supplied 12 V DC power adapter connected
to 230 V, 50 Hz mains power. The remote control is powered by the supplied 3 V
CR2025 alkaline battery.
A video surveillance system does not replace your duty of care or supervision.
Observe the regulations concerning video surveillance in commercial and public
areas.
3. Package contents
1
recorder
1
power supply
2
Audio/Video input cable with cinch socket, 30 cm
1
Audio/Video output cable with cinch plug, 150 cm
1
SD memory card (32GB)
1
IR-remote control incl. battery
1
operating manual
You still need:
#
television or video monitor to set up
#
camera with power supply and connection cable
4. Equipment
Recorder (see Fig. A)
1
Recorder
2
SD-card slit
3
LED
4
IR receiver
5
On/off and channel button
6
Power supply connection
Any other use or modification of the equipment is not authorised and presents
significant risks of accident. No liability will be accepted for consequential
damages or for damages caused by improper use or incorrect operation.
This equipment is not suitable for use by persons (including children) with
limited physical, sensory, or mental abilities or with lacking experience or
lacking knowledge unless they are supervised by a person responsible for their
safety or obtain instructions on how to use the equipment. Children must be
supervised to make sure they do not play with the equipment.
Operating instructions
1. Introduction
ant information about operation and
handling. Always observe all the safety instructions. Check whether all parts are
correctly installed before operation. If you have any questions or are unsure
about using the equipment, please ask a specialist, or obtain information on
the Internet at www.indexa.de. Keep these instructions in a safe place and pass
them on to third parties if applicable.
2. Proper use
The DVS 300 consists of a digital video recorder DVS-300, an infrared remote
control FB-DV1 and a power supply
.
It is used for recording of video and, if required, audio sequences from a
connected CCTV surveillance camera (not included). The camera must be
powered separately. The device has two A/V inputs, between which can be
manually switched. Only the signal from the selected input can be recorded.
The recording is made on a SD memory card (not included) with capacity
between 4 and 32 GB, together with time and date. A continuous recording can
be started either manually or by setting a time schedule. Alternatively the
recording can be started through detection of motion. In this mode, changes
and movements in the camera image will be detected by the internal software
and a video sequence will be recorded, together with several seconds of
recording before the detection. The video sequences are stored in a ring memory
system, i.e. the oldest sequences are automatically overwritten if the SD card is
full.
The total time period which can be recorded on an SD memory card is
determined by several factors: the capacity of the card, the selected recording
mode, the amount of movement in the picture and the selected frame rate. The
recorder can be set and live or recorded video viewed through a connecetd
television or video monitor. Alternatively, recorded sequences can be read from
the SD memory card on a PC.
The DVS 300 is designed for operation in private households.
Read through this user manual completely and carefully and while doing so
fold out page 3 with the illustrations. The operating instructions are an integral
part of the product and contain import
KSAS0101200100HE
22 - GB
GB
