Big Buck Hunter II Page 26
Version 03/04
S
YSTEM
T
ESTS
M
ENU
Big Buck Hunter II has been inspected and tested at the
factory and should arrive to you in perfect working
order. If you are experiencing any problems with the
game, the
SYSTEM TESTS MENU
is a good place to
start when tracking down the problem.
VIDEO SCREEN TESTS
You can test your monitor and adjust colors or sizes by
choosing
VIDEO SCREEN TESTS
and pressing the
START button on the desired test.
These tests can be exited at any time by pressing the
START button. The screens are a grid of colored
rectangles, a set of squares to test sizes, and then red,
green, blue and white to test the condition of the
monitor’s components. Use these colors and grids to
adjust your monitor so they look as good as possible.
SOUND TESTS
Choose
SOUND TEST
from the
SYSTEMS TESTS
MENU
to test the sounds and speakers in the game.
Use the trigger on the gun to play and change a sound.
Use the Pump to repeat the sound. The Start button
exits this test.
SWITCH TESTS
When
SWITCH TESTS
is selected, the screen will
display a diagram of the Big Buck Hunter II inputs. The
controls are highlighted on the diagram when the
controls are active. Test all of the controls, including
test and service switches.
SERIAL PORT TESTS
These two tests check the basic functions of the LED
Sign and the Card Reader, two of the primary elements
required for ITNet features.
LED SIGN
tests the integrity of the connection from the
game to the LED sign and LED hardware. Press the
START button to activate the sign test. The video
screen will display the communication status. The LED
sign will display the code version number, followed by a
string of letters and numbers, then a solid bar will scroll
across the display. Use this test to visually check for
non-functioning LED segments. If the status is bad,
contact your distributor or the IT service department.
Press the START button to exit out of this test.
