Incredible Technologies Play Mechanix Big Buck Hunter II Скачать руководство пользователя | Manualshive

Страница: 12 / 38

background image

Version 03/04

Big Buck Hunter II Page 11

PCB and Hard Drive Installation

The hard drive is shipped with a mounting bracket already attached. The bracket allows installation with a minimal
number of steps and protects the electronics from damage due to improper handling. DO NOT REMOVE the
bracket, as it may cause damage to the hard drive. Use the diagram shown below for positioning the hard drive
assembly in different types of cabinets. Make sure to position the game board and the drive close enough for the
two supplied cables to reach.

A data cable is supplied for the hard drive and is required for proper operation.  Test fit the cable supplied for the
hard drive before securing to the mounting surface.  See the insert for installation details. The supplied ribbon cable
is for data transmission. Connect one end of this cable to the keyed connector at J21 on the game board, and the
other end into the keyed connector on the hard drive.

CAUTION!

Hard  drives  are  sensitive  to  both  physical  and  electrical  shock.  DO  NOT  DROP  OR  KNOCK  OVER  the  hard
drive.   Avoid  shocks  and  other electrical  discharges.  DO  NOT  REMOVE  the mounting  bracket  from  the  hard
drive.    Removal  may  cause  damage  to  the  hard  drive  and  will  void  the  warranty.  Keep  the  supplied  padded
box for shipping any returns.  Failure to use the supplied shipping box will void the warranty.

Figure 1

Installation in Lower Cabinet

1. Install the CPU Board on the inside wall of th

e cabinet (left or right), approximately 1 ½” above the cabinet floor.

Secure the CPU board using the ten supplied #6x3/4” hex washer head sheet metal screws.

2.

Locate the Hard Drive on the cabinet floor, approximately 2” from the cabinet wall, and directly in line with the
JAMMA connector. Attach with 4 #8X ¾” wood screws (supplied). See figure 2.

Avoid jarring or vibrating

the hard drive with power tools during installation.

3. Connect the keyed Hard Drive ribbon cable to J21 on the CPU board, as shown in figure 2.

Returns

In kit games, the hard drive is shipped in a special padded box. In a dedicated cabinet, the shipping box is fastened
to the inside bottom of the cabinet. Be sure to keep this box, in case you need to ship the hard drive. Ship the
bracket with the hard drive. Do not remove the bracket from the hard drive. Failure to use the supplied box, or
removal of the bracket, will VOID THE WARRANTY on the hard drive.

«
...
10
11
12
13
14
...
»

Содержание Play Mechanix Big Buck Hunter II







































Отзывы:

Нет отзывов

Похожие инструкции для Play Mechanix Big Buck Hunter II

Бренд: Necta Страницы: 13

SilverStrike 2009 Bowler's Club

Бренд: Incredible Technologies Страницы: 106

Бренд: NAMCO Страницы: 22

Бренд: UNIS Страницы: 42

Бренд: Hitachi Страницы: 5

Бренд: Wesco Страницы: 2

Бренд: MBM Страницы: 2

Бренд: Universal Tool Страницы: 4

Marubot Football League 4 Players

Бренд: IR Robot Страницы: 45

Бренд: Huvema Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды