Version 03/04
Big Buck Hunter II Page 9
R
IFLE
H
OLSTER
I
NSTALLATION
Most BIG BUCK HUNTER games come equipped with a
specially designed rifle. To mount the rifle to the cabinet,
you need to attach a rifle holster. The rifle holster consists
of two high-impact plastic brackets. These brackets can be
mounted on the front of your cabinet, or on the side of your
cabinet.
1. Determine where you want to mount the holster. The
holster should be mounted at a comfortable height near the
control panel. Make sure the cable attached to the rifle will
reach the PCB when mounted in the proposed bracket
position.
2. Use the dimensions on the cabinet diagrams for
optimal placement.
For
FRONT MOUNTING
, center the template on a vertical
surface. Be sure the template is oriented correctly. Match
the center of the template to the center line of the cabinet.
Use only the brackets on the template labeled
A and C.
The center holes on the brackets should be 18.875” apart.
For
SIDE MOUNTING
, orient and attach the template to the
cabinet at a 30 degree angle. Be sure the template is
oriented correctly. Use only the brackets on the template
labeled
A and B.
The center holes on the brackets should
be 15.5” apart.
3. Punch or mark the center holes for the appropriate
bracket mounting holes with an awl.
4. Remove the template and carefully drill and deburr the
four 3/16” mounting holes.
5. Install the brackets using the supplied carriage bolts,
flat washers and locking nuts. Fasten the nuts securely
inside the cabinet.
