A-26
MDrive34Plus Motion Control Hardware Manual Revision R080106
appendix F
Optional Cables and Cordsets
Communications Converter Cables
USB to 10-Pin IDC (MD-CC400-000)
The MD-CC400-000 is an in-line
USB to RS-422 converter with inte-
grated 10-pin IDC cable. This product
is used to communicate to a single
MDrive Motion Control Device. The
included components will allow you
to connect the USB port of a PC* di-
rectly to the MDrive Motion Control.
The MD-CC400-000 communica-
tions converter cable is designed to be
used with all MDrive, MDrivePlus and
MDrivePlus2 Motion Control devices
that utilize an RS-422 ten pin connector interface.
Supplied Components: MD-CC400-000 Communications Converter Cable, USB Cable, USB Drivers, IMS
Terminal Interface Software.
10-Pin Locking Wire Crimp Adapter
An optional pin adapter is available to convert the 10-pin IDC connector on the Communications Con-
verter Cable to a 10-pin friction lock wire crimp interface used on the Plus
2
units.
Adapter Part # .......................................................MD-ADP-H
* If your PC is already equipped with RS-422, the MD-CC400-000 cable is not required.
Electrical Specifications
Mechanical Specifications
NOTE: The USB
drivers must be
installed before the
Communications
Converter Cable is plugged into
the computer.
WARNING! DO NOT
connect or disconnect
the MD-CC400-000
Communications Converter
Cable from MDrive while power is
applied!
10-Pin IDC Connector
Cable Length 6.0 ft (1.8 m)
MD-CC400-000
USB to RS-422 Converter Cable
www.imshome.com
USB Cable
Length 6.0 ft (1.8 m)
1.0 in
(25.0 mm)
3.75 in
(95.0 mm)
0.875 in
(22.0 mm)
USB
To MDrive
To PC USB
2.5 mm Power Jack
Figure F.1: MD-CC400-000
MD-CC400-000 Specifications
BAUD Rate
Up to 115 kbps
Connectors:
USB
RS-422 Side
10 Pin 2mm IDC
Ribbon Cable Length
6 feet (1.8 meters)
Power Requirement
Power from USB
Table F.1: MD-CC400-000 Electrical Specifications
Figure F.2: MD-CC400-000 Mechanical Specifications
Содержание MDrive 34 Plus Series
