manualshive.com logo in svg

IMS MDrive 34 Plus Series, Справочник по аппаратуре

Поделиться
Скачать
IMS MDrive 34 Plus Series Скачать руководство пользователя страница 20

1-14

MDrive34Plus Motion Control Hardware Revision R080106

Encoder (Optional)

Type .......................................................................................................................Internal, Optical
Resolution ............................................................................512 Lines/2048 counts per Revolution

Counters

Type .................................................................................................... Position (C1), Encoder (C2)
Resolution ..............................................................................................................................32 Bit
Edge Rate (Max) .................................................................................................................. 5 MHz

Velocity

Range ................................................................................................. ±5,000,000 Steps per Second
Resolution ...................................................................................................0.5961 Step per Second

Acceleration/Deceleration

Range ...................................................................................................1.5 x 109 Steps per Second2
Resolution ................................................................................................... 90.9 Steps per Second2

Enhanced Motion Specifications

Electronic Gearing

Range ..................................................................................................................... 0.001 to 2.000†
Resolution ..............................................................................................................................32 Bit
Threshold (External clock in) ...................................................................................................TTL
Input Filter Range ................................................................................................. 50 nS to 12.9 µS
Range (Secondary clock out) ................................................................................................ 1 to 1†

High Speed I/O

Position Capture ........................................ 32 Bit Resolution, 50 nS to 12.9 µS Input Filter Range
Trip Output Speed ................................................................................................................ 150nS
Trip Output Resolution ..........................................................................................................32 Bit
Trip Output Threshold .............................................................................................................TTL

Remote Encoder (Optional)

Type ..........................................................................................User-Supplied Differential Encoder 

 

Steps per Revolution...............................................See Microstep Resolutions - Open Loop, Above
Resolutions ..................................................................................................................User-Defined

† Adjusting the microstep resolution can increase the range.

Software Specifications

Program Storage, Type/Size ...................................................................................Flash/6384 Bytes
User Registers ................................................................................................................... (4) 32 Bit
User Program Labels and Variables ............................................................................................ 192
Math, Logic and Conditional Functions ............. +, –, x,÷, >, <, =, <=, >=, AND, OR, XOR, NOT
Branch Functions .......................................................Branch & Call (conditonal or unconditional)
Predefined I/O Functions ...................................Inputs Home, Limit Plus, Limit Minus, Go, Stop,  
 

Pause, Jog Plus, Jog Minus, Analog In

Outputs .................................................................................Moving, Fault, Stall, Velocity Change
Trip Functions  ....................................Trip on Input, Trip on Position, Trip on Time, Trip Capture
Party Mode Addresses  ................................................................................................................. 62
Encoder Functions  ............................................Stall Detection, Position Maintenance, Find Index

Содержание MDrive 34 Plus Series





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды