ImpulseRadar PinPointR User Manual V1.5.1
Page 10 (36)
Figure 7
Belt or Direct Drive encoder and wheel assembly
GPS mounting kit
An optional GPS mounting kit is available for the push-cart
to support the connection of external GPS receivers, as
shown in
(GPS receiver not included). This kit
contains extension poles, support arms, and an RS232 serial
cable to facilitate the connection between the GPR unit and
an external GPS receiver.
The GPS cable plugs into the GPR unit via the external GPS
socket (blue bezel), while the other end is terminated with a
standard 9-pin D-sub connector (male). When connecting an
external GPS receiver, it must have an RS232 serial output
via a wired connection. The GPS receiver should have its own
RS232 serial cable that plugs into it, while the other end is
terminated with a standard 9-pin D-sub connector (female).
With the male and female D-sub connectors are joined, a
wired RS232 serial link is established between the external
GPS receiver and the GPR unit.
Refer to Appendix
for a description of the external
GPS cable and pin-outs.
Figure 8
GPS mounting kit assembly
