IMO Jaguar CUB, Инструкция по эксплуатации

Страница: 163 / 170

9-4
Name of option Function and application
M
a
in
op
tion
Ferrite ring reactors
for reducing radio
frequency noise
(ACL) An ACL is used to reduce radio noise emitted by the inverter.
An ACL suppresses the outflow of high frequency harmonics caused by
switching operation for the power supply lines inside the inverter. Pass
the power supply lines together through the ACL.
If wiring length between the inverter and motor is less than 20 m, insert
an ACL to the power supply lines; if it is more than 20 m, insert it to the
motor output cables of the inverter.
External
potentiometer for
frequency commands An external potentiometer may be used to set the drive frequency.
Connect the potentiometer to control signal terminals 11 to 13 of the
inverter.
Remote keypad This allows you to perform remote operation of the inverter.
With the remote keypad, you may copy function code data set in the
inverter to any other inverter.
Extension cable for
remote operation The extension cable connects the inverter with the remote keypad to
enable remote operation of the inverter.
5 m, 3 m and 1 m cables are available.
RS485
communications card This makes communication to a PLC or personal computer system
possible.
O
p
tion
s f
o
r O
p
er
at
io
n
a
n
d C
o
m
m
un
ic
at
io
n
s
Inverter support
loader software Inverter support loader software, Windows based, that makes setting of
function codes easy. The RS485 communications card must be
connected.
Surge absorbers A surge absorber suppresses surge currents and noise from the power
lines to ensure effective protection of your power system from the
malfunctioning of magnetic contactors, mini-relays and timers etc.
Surge killers A surge suppressor eliminates surge currents induced by lightening and
noise from the power supply lines. Use of a surge suppressor is
effective in preventing the electronic equipment, including inverters,
from damage or malfunctioning caused by such surges and/or noise.
Arresters An arrester suppresses surge currents and noise invaded from the
power supply lines. Use of an arrester is effective in preventing
electronic equipment, including inverters, from damage or
malfunctioning caused by such surges and/or noise.
O
th
e
r p
e
riph
e
ral
eq
ui
pm
en
t
Frequency meter Displays the frequency in accordance with signal output from the
inverter.
Othe
r
op
tio
n
s
Rail mounting bases A rail mounting base allows any of the Jaguar CUB series of inverters to
be mounted on a DIN rail (35 mm wide).