Instructions for Use and Guarantee Conditions
7
IML
-Instrumenta Mechanik Labor System GmbH
I
Parkstraße 33
I
69168 Wiesloch I
Phone +49 (0) 6222 6797-0
I
Fax +49 (0) 6222 6797-10
I
E-mail [email protected]
I
Web: www.iml.de
ENGLISH
Instruction
Application
How to hold the drilling instrument
There is no special way of holding the IML-RESI measuring instrument. The measuring
results do not depend on a certain orientation. You will, however, have to ensure
your own stability during each measuring procedure, as, when the instrument
penetrates the material to be examined, there will be forces acting in opposite
direction of drilling.
Examination of wooden poles
If you examine a wooden pole, it is expedient to drill at an angle of e.g. 45°.
A 45°-adapter (optional) will serve as a support of the instrument for in inclined
position. Thus, by means of a special drilling needle, it will be easier to carry out the
examination of wooden poles.
Execution of a measurement
Preparation of the measurement
-
charging the storage battery and insert into the BOSCH Accumulator drill
-
place a wax paper strip into the IML-RESI
-
check (or insert) the drilling needle
Execution of the measurement
-
ensure your own stability
-
set the instrument to the object to be examined
-
for starting the machine, press the On/Off switch.
(The machine runs with variable speed between 0 and maximum, depending on the
pressure applied to the On/off switch)
-
for drilling (execution of a measurement), set the rotational direction clockwise!
-
switch off drill as soon as the desired drilling depth has been reached
-
after the measurement for reversing the recorder needle, set the rotational direction
anticlockwise and remove the drilling needle completely from the object to be
examined!
Pic. shows:
Functions of the BOSCH Accumulator drill GSR 12V
Professional
Utility Poles
Rotational direction
switch
On/Off switch
Storage battery
Gear selection
(400/1200 rpm)
