Instructions for Use and Guarantee Conditions
18
IML
-Instrumenta Mechanik Labor System GmbH
I
Parkstraße 33
I
69168 Wiesloch I
Phone +49 (0) 6222 6797-0
I
Fax +49 (0) 6222 6797-10
I
E-mail [email protected]
I
Web: www.iml.de
ENGLISH
Instruction
Mounting the 45°-adapter, rotatable
(optional)
(Item No.: 3100015)
Mounting:
-
disconnect the drill from the power supply for safety reasons
-
remove standard drilling needle
-
remove standard guide sleeve by turning it with pliers
-
mount the extension adapter instead of the guide sleeve
-
attach the sleeve on the extension adapter
-
one of the centering holes must point vertically upward
-
fix the sleeve by means of the 2 clamping screws
-
attach the rotatable 45°-adapter to the sleeve so as to snap in the centering hole
-
re-connect the instrument to power supply!
45°-Adapter
Extension
adapter
Centring hole
Clamping
screw
Sleeve
Catch screw
45°-Adapter,
rotatable
Catch screw
Sleeve
45°-Adapter,
rotatable
- Insert the drilling needle for 45°-adapter (length: 387 mm/497 mm/607 mm)!
- Never use a standard drilling needle and the 45°-adapter!!!
ATTENTION
In case the fixing points should be obstructive in certain situations during the drilling,
with the 45°-adapter, they may be replaced by the screw supplies.
NOTE
Extension adapter
45°-Adapter, rotatable
Sleeve
Position of
guide socket
Fixing point
