Instructions for Use and Guarantee Conditions
19
IML
-Instrumenta Mechanik Labor System GmbH
I
Parkstraße 33
I
69168 Wiesloch I
Phone +49 (0) 6222 6797-0
I
Fax +49 (0) 6222 6797-10
I
E-mail [email protected]
I
Web: www.iml.de
ENGLISH
Instruction
Attaching the BOSCH accumulator drill
First place the adapter plate. In case of need, use the reducing ring supplied.
The IML special adapter (Euro norm:
∅
48 mm/43 mm) is still attached on the new
BOSCH Accumulator drill GSR 12V
Professional
.
Place the reducing ring on the drill, then slide the adapter plate over the ring.
Fix the adapter plate to the drill by means of clamping screws.
Place the drill thus prepared on the guiding rails of the IML-RESI attachment and slide
the drill forward.
Fix the drill to the adapter plate by means of the clamping screws on both sides.
When tightening the drill holder, pay attention to the exact position of the hexagon
bolt in the drill holder.
Finally, place
Safety cover 1,
and then
Safety cover 2!
Adapter plate
Clamping screw
Tighten drill holder very firmly (perhaps by means of pliers)!
NOTE
Safety cover 1
Safety cover 2
BOSCH GSR12V
Professional
Guide rail
Adapter plate
Clamping screws
Hexagon bolt
(pay attention
to position!)
Special adapter
Adapter plate
