Instructions for Use and Guarantee Conditions
15
IML
-Instrumenta Mechanik Labor System GmbH
I
Parkstraße 33
I
69168 Wiesloch I
Phone +49 (0) 6222 6797-0
I
Fax +49 (0) 6222 6797-10
I
E-mail [email protected]
I
Web: www.iml.de
ENGLISH
Instruction
Adjusting the overload clutch by means of the sickle spanner
Adjusting the overload clutch by means of the torque wrench (TOOL KIT)
-
if the slide is in rear position, move it forward by 2 to 3 mm
-
remove the storage battery for safety reasons
-
remove the clutch cap
-
set torque wrench onto the adjusting nut and fix the adjusting nut by means of
handle (light)
-
pass the counter wrench through the opening in the torque wrench, loosen the
counter nut and unscrew it a little
-
loosen the adjusting nut a little by means of the torque wrench, then re-tighten it
slowly by means of the rotating sleeve (black) until the rotating sleeve races (shortly
move the rotating sleeve before using it)
-
grip the adjusting nut by means of the handle (light) of the torque wrench and firmly
tighten the counter nut by means of the counter wrench, ensuring that the adjusting
nut does not turn during this procedure!
Clutch cap
Counter nut
Adjusting nut
Counter wrench
Rotating sleeve
(black)
Torque wrench
Adjusting nut
Counter nut
Counter wrench Sickle spanner
Clutch cap
