Instructions for Use and Guarantee Conditions
4
IML
-Instrumenta Mechanik Labor System GmbH
I
Parkstraße 33
I
69168 Wiesloch I
Phone +49 (0) 6222 6797-0
I
Fax +49 (0) 6222 6797-10
I
E-mail [email protected]
I
Web: www.iml.de
ENGLISH
Introduction
NOTES TO APPLICATION
Materials
The IML-RESI measuring instrument has been designed for use at wooden materials
(trees, beams, poles). Inappropriate utilization may cause damages to the measuring
system and/or the material to be examined.
Certainty of reading
The measuring results gained by utilizing the IML-RESI system are not self-
explanatory, they require qualified interpretation. Any conclusions with respect to
the examined object (e.g. tree) will be left to the sole responsibility of the person
who examines. The manufacturer of the instruments will not be responsible for wrong
interpretations and conclusions, he recommends the user to attend special seminars
and training.
GENERAL
Conception
It was the intention of those who developed the IML-RESI system to make available
a measuring system for practical utilization, which is easy to handle, sturdy,
and precise at the same time.
Structure of the system
As to stability, the IML-RESI system has been designed to meet the special
requirements of practical examination of trees, structural timbers, poles, and wooden
structural materials. To ensure a long service life of the mechanical overload clutch,
you should see to it that the clutch is not exposed to avoidable wear and tear
(racing at the front or rear stop of the range of the recorder).
Moisture
During storage and utilization of the IML-RESI measuring system, you should
generally avoid the contact of water and moisture, despite its splash-proof casing.
Although the main components are protected against intake of water, you should
in order to avoid malfunction or failure - consider that instruments are generally
sensitive to moisture.
Preservation of the drilling needles
The drilling needles will have to be kept dry to prevent oxidation (e.g. rust formation),
on the surface as this might lead to particles getting into the guiding mechanism
of the drilling instrument during drilling, thus affecting its operability.
Especially for transportation purposes, you may put the drilling needles in a
quiver for safe-keeping approx. 100 drilling needles (see ’accessories optional’
at page 20).
IML-RESI F400
IML-RESI F300
As to your drill, please observe the manufacturer’s safety and application
instructions.
NOTE
