IMET Spa VELOX 350 AF-NC, Инструкция пользователя

Страница: 24 / 73

TRADUCTION OF THE ORIGINAL USER’S INSTRUCTIONS
VELOX 350AF-NC ED.2011eng rev.00 24/73
This panel shows some buttons that are not in use on these machine, and others that can cause misunderstanding about
their function. Here are resumed
1 = direction arrows, to change page or scroll text in the HELP section –see below
2= RUN to start the selected program
3= PGM edits the contents of the selected program
4= DIR goes directly to the program library
5= from F1 to F6 enables the functions illustrated by the soft key icons that appear in each case
6= display LCD: one or more icons may appear in the bottom section to identify the soft key function.
Press F6 to change screen and display other information
7= backlighting of display, press and hold to increase light
8= START ( I ) cycle or functions of resetting/calibration of feeder position
9= STOP ( O ) cycle
10 TO 14 = NOT USED
15= switches on/off on the PNEUMATIC plant. This is done whenever the machine is switched off, and if the
machine is not used for about 15 minutes it switches off automatically (a programmable timer controls this
function).
16= Coolant control. The coolant pump is switched on automatically during the cutting cycle, and switches off
at the end. You need only regulate the flow by means of the tap on the blade guide runners. However, you
can also switch it on and off using the white key with the tap symbol. The coolant setting in automatic mode
can be changed by editing the program settings (see editing user parameters).
WARNING: we recommend selecting CONTINUOUS FUNCTION if the process cycle time is 15 seconds or
less. For longer cycles select CYCLE FUNCTION .
17 GTO moves the feeder carriager as the selected quote, following the instructions on the screen
18= open pincers (the vise on the feeder) by about 7 mm so the material can pass. Width adjustment is made
using the front screw and the 3 slots where the block is located
19= close pincers
20= move feeder to the right
21= move feeder to the left
22= open mobile vise
23= close mobile vise
24= raise saw head
25= lower saw head
26= NOT USED.
27= reduce blade rotation speed
28= increase blade rotation speed
29= number keys; also +/- change data sign (from positive to negative); ARROW delete number
30=HELP button= pushs and hold for information on the data displayed on the screen and choose among
possible options
31=ENTER= confirm data or variation
32= EXIT= exit without confirming
33= Set HIGH
= push to set the start cut position, after the saw blade is positioned
34= Shift
= KEEPLY it pushed together with some others pushbuttons, they realize other function
than stated .For ex. :
Shift and Set Set (2 times # 33) = set of the cut end position where the blade is stopped
Shift and -V lama -V lama (2 times # 35) = set of cut end position at the minimum stroke
Shift and +V lama +V lama (2 times # 36) = set of the cut start position at the maximum stroke
35 , 36 = NOT USE