IMET Spa VELOX 350 AF-NC, Инструкция пользователя

Страница: 15 / 73

TRADUCTION OF THE ORIGINAL USER’S INSTRUCTIONS
VELOX 350AF-NC ED.2011eng rev.00 15/73
11.2 -
OPERATOR’S SAFETY
This section illustrates the safety protections applied on the saw, according to the current legislation in the
field of safety.
11 .2.1. ELECTRIC EQUIPMENT – Norm EN 60204-01
. Electric board closed with screws - general switch
. Marking of the electric components used, according to the indications on the electric scheme
. Control circuit with 24V tension – Control transformer with fuses on input and output
. Earthing of all electric parts with a dedicated GREEN/YELLOW wire, connected with a TN system to the
supply cable. A supplementary earthing point – indicated with PE – can be located on the metallic
structure of the machine.
. Minimum tension coil that prevents accidental restarting after a lack of tension.
. Protection from overloads and high temperature thanks to bimetal thermo-protectors placed directly in
the blade motor
. Emergency button for interrupting immediately all the movements of the machine. In order to restore all
the functions, rotate the button half a turn.
. Sensor on the vices closure: in case they do not clamp the material or the air pressure is low, the
machine stops immediately.
-
Sensor timed opening of the front cover: prevents that after the arrestof the cycle or its interruption can
be accessed to the cutting area untilthe blade is still rotating. The opening is interrupted also the
entranceof the compressed air, which must be restored by the appropriate button on the panel.
The stops caused by one of the aforementioned devices needs a complete restoring of the working cycle