IMET Spa VELOX 350 AF-NC, Инструкция пользователя

Страница: 21 / 73

TRADUCTION OF THE ORIGINAL USER’S INSTRUCTIONS
VELOX 350AF-NC ED.2011eng rev.00 21/73
In case the SPINDLE is rotating in the opposite direction, turn the machine off by pushing the general switch -
pos.2/dr. RI0346 -, disconnect the line plug, change the connection of two of the wires of the line connection,
except for the green / yellow grounding cable and start again from point b).
h) In case the chips suction plant (OPTIONAL) has been connected into electric box as suggested ( or you are in order to
connect it) is possible switch it it by the 3 pushbuttons for the coolant, with the 3 standard functions : stop/start/ in cicle –
pos. 16/RI0502-
i) Stop the working by pushing the black button 0 - pos. 9/RI0502-.
If the EXTERNAL VOLTAGE TRANSFORMER is supplied too, place it in carefully and safely, far from the
loading/unloading areas.
-13.4- BLADE MOUNTING
Choose the blade following the instructions indicated in the previous paragraph number 7.
Rotate backsides the movable carter -pos.1/dr.RI0069- (inside of the fixed carter - pos.2/dr.RI0069) by loosing the outside
arm-pos.3/dr.RI0069.
Through the hole of the carter, with the tube spanner of 22 mm., unscrew the screw -pos.1/dr.RI0070 left thread, by the
sticker indication.
In case the spindle do not stay fix, rotates, introduce a little pin into the hole placed under the spindle -- take out the
parts pos.2 and 3 dr.RI0070- and keep clean the supporting surfaces.
Place the blade on the spindle shaft - pos.5/dr.RI0070 - by guiding the teeth towards the PRINTED ARROW -
pos.2/dr.RI0069- placed on the carter.
Mount again the closing flange - pos.3/dr.RI0070, the washer - pos.2/dr.RI0070, and the screw-pos.1/dr.RI0070-. To
tighten strongly this screw it is necessary to fit in a little pin (for example one of the supplied allen spanner ) in the
hole placed under the spindle so that the blade holder shaft cannot rotate.
Replace the movable carter - pos.1/dr.RI0069 - in the initial position and fix it with the outside arm -pos.3/dr.RI0069.