Imagine Videotek LLM-1770, Инструкция по установке и эксплуатации

Страница: 51 / 122

LLM-1770
Installation and Operation Manual
45

Range : This selection is used to activate the relative gating. If relative gating is
active, the Relative Gating Value selection ranges from -22 LU to -18 LU. The
default setting is -20 LU.

Target Loudness : This selection is used to set the target value for the desired
loudness level.

Level selections range from -31 LKFS to -1 LKFS The default selection is -23
LKFS.

The High Level Above target selection sets the range of allowable values
above the target value for the desired loudness level. Selections range from 0
LU to 10 LU. The default setting is 1 LU.

The Low Level Below target selection sets the range of allowable values
below the target value for the desired loudness level. Selections range from 0
LU to 10 LU. The default setting is 1 LU.

Absolute Gating : This selection can be set up to enable the use of absolute gating.
Absolute gating settings range from -70 LKFS to -50 LKFS. The default setting is -70
LKFS.
Dolby Setup Menu
The Dolby setup menu is used to configure the Dolby decoder option if installed.
Menu Selections
Table 4-6 Dolby Setup Menu
Selection Option Selection Option Selection Option
Dialnorm Source VANC
Dolby Decoder *
Input Embedded Pair 1 to 8
AES Pair 1 to 4
Dolby Input Format Autodetect *
Dolby E Only
Dolby D Only
AES Channel Select Channel 1,2
Downmix Select Program Select Pgm 1 to 8
Lt/Rt *
Lo/Ro
Mono
Mute
Downmix DRC Mode Line *
RF