Imagine Videotek LLM-1770, Инструкция по установке и эксплуатации

Страница: 23 / 122

LLM-1770
Installation and Operation Manual
17
Ethernet Setup
The Ethernet default settings for the LLM-1770 are as follows:

IP: 192.168.0.100

Subnet Mask: 255.255.255.0

Gateway: 0.0.0.0
1 Prior to performing the LLM-1770 network configuration, obtain TCP/IP addresses from the
system administrator or the Internet service provider (ISP). These addresses are a static IP
address (unless using Dynamic Host Configuration Protocol [DHCP]), a subnet mask, and an
optional gateway IP.
Be sure to record all addresses in the spaces provided below. The gateway address is not
needed unless the LLM-1770 is routed to an outside network.
LLM-1770 interface static IP address
LLM-1770 interface subnet mask
Gateway IP address
2 Identify a host PC to configure and test the LLM-1770.
3 Choose a dedicated PC connection or network connection method:

For a dedicated PC connection, connect the host PC with a network card to the “ENET”
connector on the back panel of the LLM-1770, using a CAT5 network cable (not
included). See
Figure 2-3 .
Figure 2-3 LLM-1770 Dedicated PC Connection

For a network connection, connect the network hub to the back panel of the
LLM-1770 using a CAT5 network cable (not included). See
Figure 2-4 .