Imagine Selenio X100, Инструкция по установке и эксплуатации

Страница: 89 / 178

Selenio X100
Installation and Operation Manual
77
Figure 3-23 Append Embedding Mode; Adding Group 1 When Group 1 Already
Exists
If you insert Group 2 audio when there is pre-existing Group 1 audio in the ancillary data
space and no Group 2 audio, the Group 2 audio is inserted following the Group 1 audio, as
shown in
Figure 3-24 .
Figure 3-24 Append Embedding Mode, Adding Group 2 Following Group 1
If you insert Group 1 audio when there is pre-existing Group 2 audio in the ancillary data
space and no Group 1 audio, the Group 1 audio is inserted following the Group 2 audio, as
shown in
Figure 3-25 .
Figure 3-25 Append Embedding Mode, Adding Group 1 Following Group 2
An audio group cannot be divided. In Append embedding, the audio group is always added
following the last block in the ADS. If there is not enough room to append the audio group
following the last block of ancillary data
or audio in the ADS, the attempt results in an error,
as shown in Figure 3-26 .
Figure 3-26 Append Embedding Mode Failure
ADS after attempting to embed group 1
ADS before embedding
-
1
EAV
EAV
1
Result: Error is returned
Pre existing
Group
Pre-existing
Group
EAV
EAV
ADS before embedding
ADS after embedding group 2
Group 1
Group 1
Group 2
ADS before embedding
EAV
EAV
ADS after embedding group 1
Group 2
Group 2
Group 1
ADS before embedding
EAV
ADS after attempting to embed group 1
EAV
Other
ancillary data
Result : Error is returned
Other
ancillary data
Other
Ancillary Data
Other
Ancillary Data
Other
Ancillary Data
Other
Ancillary Data