Imagine Selenio X100, Инструкция по установке и эксплуатации

Страница: 72 / 178

Selenio X100
Installation and Operation Manual
60
Figure 3-18 Static Logo Dialog Box

A preview of the composited logo displays in the Logo Image Preview area.

A preview of the image alpha displays in the Logo Alpha Preview area if the file
contains alpha.
7 Select a file to use as the alpha channel for your logo.
You must select a file before you can save the logo.

To use the original image's alpha channel, select the Use the alpha key found with
image check box.

To use a different image for the alpha channel, clear the Use the alpha key found
with image check box, and then click the Open button to select a new file for your
alpha channel.
Note: An alpha channel is an 8-bit layer in a graphics file format that is used for expressing
translucency (transparency). Typically, you define the alpha channel on a per-object basis.
Different parts of an object will have different levels of transparency depending on how
much background you want to show through.
8 Click the Save button in the Static Logo dialog box.
The Save Logo File dialog box opens where you can save your logo as an .mg2 file.
Once you save the logo as an .mg2 file, the logo displays in the LogoCreator
workspace.
Note: The Logo Position and Opacity controls on the LogoCreator software are not
active. These features are controlled by the X Position , Y Position , and Transparency
parameters found in the Selenio X100 parameter list at Video > Processing Channel 1
and 2 > Logo 1 and 2 > Raster x .
Video TSG-OSD 1 and 2
Test Signal Generator
The Selenio X100 includes two video test signal generators (one for each conversion
channel) that will provide the following:

75% Color Bars Signal