Imagine Selenio X100, Инструкция по установке и эксплуатации

Страница: 55 / 178

Selenio X100
Installation and Operation Manual
43
AFD/VI/WSS Insert
The Pass option allows the incoming AFD code to be inserted unmodified. This option is
only supported in SD-ARC and crossconversion modes. In up- or downconversion modes,
the
Pass option is equivalent to a loss of code, even when an input code is present. When a
loss of code occurs, the X100 will insert your selection from the AFD/VI/WSS Pass on Loss
parameters.
If you select Remove , no code is generated. The original input code is removed, except for
the following:

WSS in line 23

All codes in proc bypass mode.
When you select the Auto option, the X100 generates code automatically and inserts it.
The code can be generated in one of the following scenarios:

A standard or custom aspect ratio is selected, and the corresponding AFD, VI, or WSS
code is inserted.

The ARC Control parameter is set to AFD, AFD-ALTR, VI, VI-ALTR, WSS, or WSS-ALTR,
and the generated output code is based on input code according to the alternate
implementations of the standard.

The ARC Control parameter is set to AFD-Custom Map, VI-Custom Map or WSS -
Custom Map, and the output code is generated from the custom map settings.
When you select Custom AFD Map, the output code is generated according to the custom
map table.
AFD/VI/WSS Pass On Loss
This parameter controls the passing behavior if the AFD, VI, or WSS signal is lost.
AFD-VI-WSS Custom Mapping
Using the controls in AFD-VI-WSS Custom Mapping , you can define a special mapping
table other than the one specified by a standard. Given any input AFD, VI or WSS code, you
can define the aspect ratio behavior and output AFD, VI and WSS code independently.
Custom ARC
The parameters of Custom ARC make it possible to scale and pan the output image to any
size and location. These parameters include: Horizontal Offset, Vertical Offset ,
Horizontal Scale , Vertical Scale , Crop Left , Crop Right , Crop Top , and Crop Bottom .
By recalling a standard aspect ratio or a pre-defined custom aspect ratio preset, you can
individually modify—or batch-modify—these parameters.
Live Edit View
The Live Edit View feature makes it possible to visually align various parameters. Select On
to activate immediate ARC output changes.