Imagine Selenio X100, Инструкция по установке и эксплуатации

Страница: 37 / 178

Selenio X100
Installation and Operation Manual
25
Accessing MIBs and Configuring SNMP Support
MIB files for the X100 can be downloaded directly from any X100 frame. Before
downloading X100 MIBs, you must first download the InfrastructureNetwork.mib file. Copy
the following into a browser to access the InfrastructureNetwork.mib:
http://<IP address>/InfrastructureNetwork29286.mib
<IP address> is that of the X100
Once any MIB file is downloaded from the frame, you should rename it immediately to
prevent overwriting.
To download an X100 MIB file, copy this line into a browser:
http://<IP address>/X100.mib
The required SNMP Agent settings are as follows:

Location —A text string that indicates the location of the device.

SNMP Community String —The setting here must match that in a MIB browser in
order for the two devices to share information.
You can define ten trap destinations, as follows:

SNMP Dest Desc —Description of the host to which SNMP trap messages will be sent.

SNMP IP Address —If non-zero, specifies the IP address of a host to which SNMP trap
messages will be sent.
Default IP Address
The default IP address of an X100 is: 192.168.100.250 .