Image Access WideTEK 42, Руководство пользователя

Страница: 114 / 131

Page 114 Manual
C.5.2.2 Operation Info Screen
In the section Information the button Operation Info opens the following list.
It shows various scan counters and elapsed time described in the following table.
Picture 111: Operation Info screen
The following table gives a brief description.
Field Description
Total Scan Count The total number of scans performed since the scanner left
the factory. Each CCD scan cycle is counted, regardless of
it being a pre-scan or a full scan.
Total Power Up Cycles The total number of power up cycles performed since the
scanner left the factory. This function counts the start/stop
button invoked cycles only.
Total Operating Time The total operating time since the scanner left the factory.
This is the on-time only, standby time does not count.
Lamp Operating Time The total lamp operating time since the scanner left the
factory. This is the on-time including the dimmed lamp
periods.
Remaining Lamp Operating
Time The typical remaining lifetime of the lamps. The lifetime of
the lamps lasts under normal work conditions for the
complete lifetime of the device.
To return to the USER screen (Picture 109) click the button Back to Main Menu .
Click the button Launch Scan Application to switch directly to the main screen of the
integrated S2N user interface.