PG 40
EMC DECLARATION
laser should be observed to verify normal operation. If abnormal performance is
observed, additional measures may be necessary, such as re-orienting or relocating the
iM3 Laser
.
b Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
Recommended separation distances between portable and mobile RF
communications equipment and the iM3 Veterinary Laser
The
iM3 Laser
is intended for use in an electromagnetic environment in which radiated
RF disturbances are controlled. The customer or the user of the
iM3 Laser
can help
prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the
iM3 Laser
as
recommended below, according to the maximum output power of the communications
equipment.
Rated maximum
output power of
transmitter (W)
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
P
d
17
.1
=
80 MHz to 800 MHz
P
d
17
.1
=
800 MHz to 2,5
GHz
P
d
17
.1
=
0.01
0.12
0.12
0.07
0.1
0.37
0.37
0.22
1
1.17
1.17
0.70
10
3.69
3.69
2.21
100
11.67
11.67
7.00
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects, and people.
WARNING
：
Use of accessories, transducers, and cables other
than those specified or provided by the manufacturer of this
equipment could result in increased electromagnetic or
decreased electromagnetic immunity of this equipment and
result in improper operation. The cable of the laser has a length
of 1.7m.
