PG 20
SOFTWARE OPERATION
NOTE: Use your clinical judgment to determine all aspects of
treatment including, but not limited to, the laser treatment
protocol, technique, power settings, pulse duration and interval
settings, mode of operation, as well as the accessories (e.g. tip
type) and other procedural requirements. Closely observe and
monitor clinical effects and use your judgment to determine the
clinical parameters and approach for the treatment; make
appropriate power, pulse length, and interval adjustments to
compensate for varying tissue composition, density, and
thickness. Always start treatment at the lowest power setting for
the specific indication and increase as required. We assume no
responsibility for parameters, techniques, methods, or results.
NOTE:
CW mode (Continuous Wave Mode): Imply a continuous,
uninterrupted laser beam as long as the laser is activated.
Pulse mode: Laser delivers its energy in the form of a single pulse
or a train of pulses.
3)
READY / STANDBY Button: Users could access READY mode by
pressing the “READY” button. Or press “STANDBY” button to return to
STANDBY mode.
4)
Menu Bar: Users can access the submenus through the Menu Bar,
which includes four submenus - Operation, Patients, Training and
Settings.
5)
Preset: Select a protocol according to your treatment. You can:
Select the factory-loaded presets which are recommended by the
manufacturer.
Alternatively, choose or save your own presets.
6)
Wavelength selection: Users can choose the most suitable laser
