36
When installing the appliance, we recommend checking that the hob’s burner
minimum has been properly adjusted: a proper adjustment is that when passing
from the maximum position to the minimum position, the flame is reduced, stable
and homogeneous.
If the flame on minimum is incorrect or if the gas has been changed, adjustment
must be carried out as follows:
1. Light one burner at a time and turn the flame up to maximum.
2. Remove the knob of the corresponding gas tap.
3. Turn the tap to minimum position.
4. Using a small flathead screwdriver, unscrew, turning to the left, to increase the
flame, or screw to the right to decrease it: the by-pass to be adjusted is indica-
ted by the figure B1 and B2.
5. If a liquid gas is used (Butane-Propane), the screw (by-pass) must be fully
screwed in.
by-pass
Pic. B1
INSTALLAZIONE
Adjustment of minimum
