Illinois Tool Works ITW Dynatec APEX SLOT DIE APPLICATOR, Техническая документация инструкция

Страница: 67 / 98

Chapter 8
Component Illustrations and Bill of Materials ITW Dynatec
Apex Slot Die Applicator, Manual #40-47, Rev. 10.16 Page 67
Typical APEX 150mm Service Block Assembly, PN 111082
Item No. Part Number Description Quantity
1 107324 Anti-Seize Lube (not Shown) A/R*
2 110427
Module Assembly (Interchangeable, shown for
reference only)
1
3 101625 Fitting, Plug, 1/4 BSPP, Soc, Stl 2
4 101624 Fitting, Straight, 6 JIC x 1/4 BSPP 1
5 110436 Service Block, 150mm 1
6 103470 Set screw M3x5mm 1
7 803960 Heater 10 x 40mm, 240V, 200W 2
8 N07354 Screw M4x10mm 1
9 110437 Cover Plate 48 x 150mm 1
10 106137 Screw M3x8mm 10
11 104228 Ferrule, Wire, 16 Awg, 2.7 (not shown) 4
12 001U002 Lube, Dow Corning, 112 (not shown) A/R*
13 107881 Terminal Block, 2 Pos, C 1
14 105060 Nut M8 4
15 106321 Washer, Flat, M8 4
16 107536 Set screw M8x60mm 2
17 N04302 Washer, Lock, Ext T #10 1
18 N04268 Terminal Ring, 22-16, #10, 1
19 110449 Block, Filter, Depres, B & A, D2 1
20 808285 Screw M4x65mm 4
21 N00183 O-ring -016 1
22 104852 Screw M10x12 1
23 101833 Screw 10-32 x 1/2 1
24 106303 Cap, Filter 1
25 N03812 O-ring -125 1
26 103347 Heater and Sensor Plate 1
The following shown for reference only; see your
order for specific Part Numbers.
27 106273 Filter Basket, 150 mesh (see your order for size) 1
101247
Filter Basket, 100 mesh (optional) (see your order for
size)
28 103467 Cable Assembly, 240V, DCL 1
* see separate drawing and/or bill of material.
A/R* = As required.