Illinois Tool Works ITW Dynatec APEX SLOT DIE APPLICATOR, Техническая документация инструкция

Страница: 70 / 98

ITW Dynatec Chapter 8
Component Illustrations and Bill of Materials
Page 70 Apex Slot Die Applicator, Manual #40-47, Rev. 10.16
Typical APEX 190mm Service Block Assembly, PN 111289
Item No. Part Number Description Quantity
1 N07354 Screw M4x10mm 1
2 N04302 Washer, Lock, Ext T #10 1
3 N04268 Terminal Ring, 22-16, #10 1
4 N03812 O-ring, -125 1
5 N00183 O-ring, -016 1
6 001U002 Lube, Dow Corning, 112 (not shown) A/R*
7 808285 Screw M4x65mm 4
8 803960 Heater 10 x 40mm, 240V, 200W 4
9 110449 Block, Filter, Depres, B & A, D2 1
10 110982 Cover Plate 48mm x 1900mm 1
11 110981 Service Block, 190mm 1
12 110427
Module Assembly (Interchangeable, shown for
reference only)
1
13 107881 Terminal Block, 2 Pos, Ceramic 1
14 107536 Screw M8x60mm 2
15 107324 Anti-Seize Lube (not shown) A/R*
16 106321 Washer, Flat, M8 4
17 106303 Cap, Filter 1
18 106137 Screw M3x4mm 8
19 105060 Nut M8 4
20 104852 Screw M10x12 1
21 104228 Ferrule, Wire, 16 Awg, 2.7 (not shown) 4
22 103470 Screw M3x5mm 1
23 103347 Heater and Sensor Plate 1
24 101833 Screw 10-32 x 1/2 PH 1
25 101625 Fitting, Plug, 1/4 BSPP, Soc, Stl 5
26 101624 Fitting, Straight, 6 JIC x 1/4 BSPP 1
The following shown for reference only; see your
order for specific Part Numbers.
27 106273 Filter Basket, 150 mesh (see your order for size) 1
101247
Filter Basket, 100 mesh (optional) (see your order for
size)
28 103467 Cable Assembly, 240V, DCL 1
* see separate drawing and/or bill of material.
A/R* = As required.