Chapter 8
Component Illustrations and Bill of Materials
ITW Dynatec
Apex Slot Die Applicator, Manual #40-47, Rev. 10.16
Page 59
Chapter 8
Component Illustrations and Bill of Materials
WARNING
All parts must be periodically inspected and replaced if worn or broken. Failure to do this
can affect equipment’s operation and can result in personal injury.
This chapter contains the component illustrations (exploded-view drawings) for each
assembly. These drawings are useful for finding part numbers as well as for use when
maintaining or repairing the equipment.
Note: Most common nuts, bolts and fasteners can be obtained locally at your hardware
store. Specialty fasteners are available by contacting ITW Dynatec’s Customer Service.
APEX Slot Die Applicator Model Designation Guide
APEX XX X X
X
X
Example: APEX 27
C
B
D
W
Notes:
* Special applicators may have characters in this field for each module position.
** 100 mesh filter should be used with 0.010” shim and larger.
Application Width/ Modules/ Zones
05 = 50mm/ single module/ 1 zone
07 = 76.2mm/ single module/ 1 zone
11 = 110mm/ single module/ 1 zone
15 = 150mm/ 2 modules/ 1 zone
19 = 190mm/ 3 modules/ 1 zone
27 = 270mm/ 5 modules/ 1 zone
31 = 310mm/ 6 modules/ 2 zones
35 = 350mm/ 7 modules/ 2 zones
39 = 390mm/ 8 modules/ 2 zones
47 = 470mm/ 9 modules/ 2 zones
51 = 510mm/ 10 modules/ 2 zones
Module Solenoid Configuration *
C = No module (block off)
D = Mod. w. 24VDC manifold-mount solenoid (standard)
E = Mod. w. 24VDC tube-mount MAC 45 series solenoid
F = Mod. w. tube mount, no solenoid
G = Mod. w. 110VDC tube-mount solenoid
H = Mod. w. 240VAC tube-mount solenoid
I = Festo module base without solenoid
J = Mod. w. 24VC tube mount MAC 400 series solenoid
S = Special flow modules
Wing Capability:
S = None (standard)
W = Wing-capable
Control:
D = DynaControl / PLC (standard)
L = Mel J-type Thermocouple
M = MCV
N = Nor Upgrade (Nickel RTD)
P = DynaDro/ Dynaplus
X = Mel PT100 Sensor
Filter Options ** :
A = 100 mesh, basket (standard)
B = 150 mesh, basket
C = 200 mesh, basket
E = 150 mesh, spin-on
N = No filter
