Operating manual - English
ECODRILL 2000 C/E
21
7.4
Cutting Laser (sidewinder) type keys
Before activating the start switch (Q) lower lever (I) close to the keys and regulate the spring
system for laser (sidewinder) keys (ch. 6.4) with knob (O).
1) start the cutting operation by activating switch (Q).
2) lower the spindle, cut the key and stop at the beginning of the cut (fig.17) (fig. 18).
•
secure the spindle at this height by turning the lever (I) clockwise.
•
carry out the cuts using only the left-hand lever (C).
Fig. 17
Fig. 18
E
E1
bar
