Operating manual - English
ECODRILL 2000 C/E
7
1
TRANSPORT
The ECODRILL 2000 C/E key-cutting machine is easily transported and is not dangerous to handle.
The packed machine can be carried by one person.
1.1
Packing
The packing used for the ECODRILL 2000 C/E guarantees that the machine will travel safely without
danger of damage to it or its components.
The packing comprises four shells in expanded plastic in the machine is wrapped.
A strong outer cardboard box, the measurements of which can be seen in fig.3 and the plastic wrapping
protect the machine even over a long period of storage.
Fig. 3
1.2
Transport
The symbols on the outside of the packing box show the ideal conditions for transport.
Use of the packing box whenever the machine is transported will avoid knocks or bumps which could
cause damage.
1.3
Opening the packing
To remove the machine from the packing box:
1) cut the straps with scissors and remove.
2) open the box without damaging it as it may be used again (removals, despatch to the manufacturers
for repairs or servicing).
3) check the contents of the box, which should comprise:
- 1 ECODRILL 2000 C/E key-cutting machine packed in protective shells.
- 1 set of documents including: operating manual, spare parts list and guarantee.
- 1 connecting wire.
- accessories provided
4) remove the key-cutting machine from the protective shells.
1.4
Handling the machine
When the ECODRILL 2000 C/E has been unpacked, place it directly on its workbench.
This operation can be carried out by one person,
firmly holding the base and no other part, to lift and
carry the machine
.
440 mm
590 mm
555 mm
Keep dry
This side up
Handle with care
